CLIMATE at HOME
climatic platform
Complex solutions Your comfort
ABOUT US ||  VENTILATION ||  CONDITIONING ||  HEATING ||  CONTACT




LATEST
PUBLICATIONS
rusukr

FANS

Centrifugal fans for channel circular cross-section systemsCentrifugal fans for channel circular cross-section systems standard sizes from 100 to 450 mm. Used in inflow and exhaust ventilation systems of residential, public, administrative-household and other commercial buildings, with aerodynamic resistance in the system up to 500 Pa. Productivity from 100 to 4000 m3/h. Power supply 230 V, for standard sizes 355 - 450 - 400 V. The rotation can be controlled by semistor type regulators. Case plastic, steel dyed or galvanized steel. Material of the impeller - steel or aluminum.


Centrifugal fans for rectangular channel systems Centrifugal fans for rectangular channel systems standard sizes from 300х150 to 1000х500mm. Used in inflow and exhaust ventilation systems of industrial, residential, public, administrative-household and other buildings of commercial purpose, with aerodynamic resistance in the system up to 1000 Pa. Productivity from 1000 to 12000 m3/h. Power supply 230 V or 400 V. The rotation can be controlled by transformer controllers or frequency converters. Steel case painted or galvanized steel. Material of the impeller is steel.


Fans of mixed type (centrifugal-axial) Fans of mixed type (centrifugal-axial) for channel systems of circular cross section sizes from 100 to 400 mm. Used in inflow and exhaust ventilation systems of residential, public, administrative-household and other commercial buildings, with aerodynamic resistance in the system up to 500 Pa. Productivity from 100 to 3000 m3/h. Power supply 230 V. Turning control can be done by semistor type regulators or two-stage switches. The case is made of heat-resistant, high-strength plastic. Material of a wheel - plastic or aluminum.


Centrifugal fans Centrifugal fans Dimensions on the impeller from D160 to D800mm. Used in inflow and exhaust ventilation systems of industrial, administrative-household and other buildings of commercial purpose, with aerodynamic resistance in the system up to 5000 Pa. Productivity from 1000 to 100000 m3/h. Power supply 400 V. The rotation can be controlled by frequency converters. Steel case painted or galvanized steel. Material of the impeller is steel.


Roof fans Roof fans (centrifugal or axial) of standard sizes on a working wheel from D200 to D800mm. They are used in exhaust ventilation systems of industrial, administrative-household and other buildings of commercial purpose, with aerodynamic resistance in the system up to 2000 Pa. Productivity from 1000 to 40,000 m3/h. Power supply 400 V. The rotation can be controlled by frequency converters. The case is steel dyed or galvanized (anodized) steel. Material of the impeller is steel. They are installed on the roof with the release of air in the vertical or horizontal directions.


Axial fans
Axial fans
standard sizes from D200 to D450mm. Used in exhaust ventilation systems, both industrial and administrative-household and other buildings of commercial purpose, with aerodynamic resistance in the system up to 150 Pa. Productivity from 100 to 3000 m3/h. Power supply 230 V and 400 V. Steel case painted or galvanized steel. Material of the impeller - steel or aluminum.


Axial domestic fans Axial domestic fans standard sizes from D80 to D150mm. They are used in exhaust ventilation systems of housing and administrative buildings of commercial purpose, with aerodynamic resistance in the system up to 90 Pa, - most often in bathrooms, baths, small living and administrative premises. Productivity from 50 to 200 m3/h. Power supply 230 V. Material of the case and impeller - plastic of different colors and quality. The impellers can rotate both on the bushings and on roller bearings.


Fans of special purpose
Fans of special purpose
can work in special conditions - an aggressive or explosive environment, high temperatures, etc. By type they can be both centrifugal and axial, according to standard sizes - as well as ordinary fans. The feature of such fans is the performance of the body, impeller, engine, etc. from certain materials and equipment with certain protection, depending on the working conditions for which they are manufactured.


Fans of floor execution Fans of floor, table, ceiling execution are designed to create an increased air velocity in the zone of human stay in order to create more comfortable conditions at elevated ambient temperatures. Used in industrial, residential and office premises.


copywrighting 2011-2017up  A fan club of fresh air google-plus twitter facebook vkontakte