Complex solutions Your comfort CLIMATE at HOMEclimatic platform | |
ABOUT US || VENTILATION || CONDITIONING || HEATING | |
LATEST PUBLICATIONS Effective ways to reduce the cost of heating... Installation of the shower cabin independently The comfort in the house is furniture Stylish design of a small bathroom Upholstery of metal doors.... Conditioner - problems or pleasure?.... Cooling commercial premises with the use of chillers..... Practical and durable materials for sanitary ware.... What etermines the comfort of the bathroom.... Children's sports corner.... Home pool.... Refrigeration agents.... Metal-plastic windows and the comfort.... Burners for electric cookers.... Energy saving and insulation materials. Mineral wool..... LED revolution.... Man and Real Estate.... Recuperators in ventilation.... Juicer is a climate equipment?.... |
Air conditioners typesWall-mounted split system. It consists of an indoor unit wall and outdoor mounted unit. The outdoor unit is mounted externally and can be with on / off compressor or inverter type. The inverter air conditioners is characterized by less electricity consumption, higher energy efficiency, greater accuracy of maintaining the set room temperature and the ability to work on heating and cooling at negative ambient air temperatures. Maximum capacity for cold of the wall-mounted split system is 11 kW. Coarse air purification filter. Ventilation, drainage, there are models with additional features. Usually used in residential and small office and commercial premises. Cassette type split system. It consists of an indoor unit wall and outdoor mounted unit, which is mounted in the interstellar space so that only the front panel of the block is visible. The outdoor unit is mounted externally and can be both on / off and inverter type, which is characterized by lower power consumption, high energy efficiency and precision of maintaining the set temperature, the ability to work on heating and cooling at negative ambient air temperatures. Maximum cooling capacity of cassette-type split systems up to 20 kW. Coarse air purification filter. Modes of ventilation, drainage. Built-in drainage pump. Used for cooling residential, office, public and other commercial ceilings with high ceilings. Duct-type split system. It consists of an outdoor unit and an indoor unit that is mounted in the underfloor space. The peculiarity of duct air conditioners is that the cooled air can be fed through channels and grilles into different areas of the room, as well as the possibility of mixing fresh air. The outdoor unit is mounted externally and can be on / off or inverted. The inverter compressor is characterized by lower power consumption, higher energy efficiency and precision of maintaining the set temperature, the ability to work on heating and cooling at negative temperatures. Maximum cooling capacity of duct-type split systems up to 24 kW. Coarse air purification filter. Modes of ventilation, drainage. It is used for cooling residential, office, public and other rooms with large underfloor space. Split system consol (ceiling-floor) type. It consists of an outdoor unit and an indoor unit mounted horizontally under the ceiling or vertically on the wall at floor level. The outdoor unit is mounted outside the building and can be both on / off and inverter type, which is characterized by lower power consumption, higher energy efficiency and accuracy of maintaining the set room temperature, the possibility of heating and cooling at negative temperatures. Maximum capacity for cold console-type split systems up to 20 kW. Coarse air purification filter. Modes of ventilation, drainage. It can create a powerful jet, so it is advisable to install it in high ceilings or in a non-working area. Used for cooling office, public and commercial premises for various purposes. Column type split system. It consists of an outdoor unit and an indoor unit that is installed on the floor. The outdoor unit is mounted externally and can be on / off or inverter, which is characterized by lower power consumption, higher energy efficiency and accuracy of temperature maintenance, the ability to operate on heating and cooling at negative temperatures. Maximum capacity for cold of split type column system up to 30 kW. Coarse air purification filter. Modes of ventilation, drainage. It can create a powerful jet, so it is advisable to consider this when mounting. They are used for cooling and heating of large premises, halls, restaurants, office, public and commercial premises for various purposes. They can be fitted with additional TENs for air heating. Window type air conditioner. It is a monoblock mounted in the window opening. A feature of window air conditioning is that the cooled fresh air is fed directly from the street into the room. This is an advantage on the one hand, and a disadvantage on the other, as it limits their scope and capacity. Usually - only cold. The maximum power of the window air conditioner is up to 3 kW. Coarse air purification filter. Air damper. Modes of ventilation, drainage. It is used for cooling of office, public and other premises of small area. Mobile air conditioner. It is a monoblock that can be moved from one room to another and move within certain limits. A feature of mobile air conditioning is the presence of an air sleeve to remove warm air outside the room. Usually - only cold. The maximum power of the window air conditioner is up to 6 kW. Coarse air purification filter. Modes of ventilation, drainage. It is used for cooling of office, public and other premises of small area. Multi-split system. It consists of a single outdoor unit that can be connected to multiple (depending on model and capacity) indoor units of any type. It is important that the sum of the capacities of all the indoor units does not exceed the capacity of the outdoor unit to which they are connected. The operation of each of the indoor units is autonomous. Used for cooling residential, office, public and other premises. |
copywrighting 2011-2023 Contact |